Laguna SuperMax 37×2 Dual Drum Sander 5HP (WM37003).
Sand two grits in a single pass with a 37×2 Double Drum Sander. Featuring INTELLISAND Technology and a 5 HP motor, you can significantly reduce the amount of time you spend sanding.
The 37×2 Double Drum Sander features INTELLISAND Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor. Available in Single and 3 Phase power.
- Prevents gouging, damaging or burning stock
- Provides consistent finish even with varying grain pattern and density
- Greatly increases abrasive planing and dimensioning speed
- Drum ball bearing are sealed and permanently lubricated
- Cast stand, zinc-plate steel bed, centerless ground column tubes
- INTELLISAND Control: Automatically adjusts conveyor speed based on load
- Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor,
- guaranteeing flatness to less than .010″ across the width of the sander
- Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner
- Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap.
- Easiest access to abrasive fastening system of any drum sander! Machine design includes additional space around abrasive, eliminating the need for special tools
- Self-cooling drum prevents overheating and extends abrasive life
Maximum Sanding Width: 37″ (940mm)
Minimum Sanding Length: 3-1/2″ (89mm)
Maximum Sanding Thickness: 12″ ( 305mm)
Minimum Sanding Thickness: 1/32″ (0.8mm)
Drum Speed: 1740 RPM
Drum Type: Double Drums, Extruded Aluminium
Drum Dimensions: 37″ x 5″ (940mm x 127mm)
Dust Hood: Steel Hood Hinged at Back, Three ports each 4″ (101mm)
Recommended Minimum Extraction: 1800 CFM
Bearings: Sealed & permanently lubricated
Conveyor Motor: 100 in. -lb. torque, Direct Drive D.C motor
Conveyor Speed Range: Variable, 0-15 FPM (4,572mm per Minute)
Drive Motor: TEFC, 5HP (3.75 Kw)
Power requirements: 230V, 60HZ; 1 Ph, 30 amp service
Dimensions: Height: 43″ (1092mm)
Dimensions: Width: 58″ (1473mm)
Dimensions: Depth: 31″ (864mm)
Weight: 525 lb (238 Kg)