Souber Tools DBB Morticer 101: FAQ

Frequently Asked Questions

Q: What is included in the price of the DBB Morticer?
A: Every DBB Morticer Kit comes in a heavy duty case, the jig of your choice, self centring or adjustable stops, drive shaft, three wood cutters and an instruction manual.

Q: Are there any additional and special accessories for the DBB morticer?
A: Yes. We provide spare parts for each individual piece of the Morticer – see our section on Spare Parts for the full list of our off-the-shelf replacement parts.

Q: Are there any instructions with the DBB Morticer?
A: Yes. We provide a comprehensive instruction manual that is complete with illustrations and written instructions. It is an easy to follow guide for either the novice or for the experienced professional.

Q: What cutters come with the Jig?
A: Usually 3 popular wood cutters. Ask your supplier for precise details.

Q: What are the cutters made from?
A: Mortice wood cutters are carbide tipped. Plunging and aluminium cutters are HSS.

Q: Can the wood cutters be re-sharpened?
A: Yes. The instruction manual provides advice and instructions on sharpening.

Q: Can I plunge with the wood cutters
A: Yes, four (4) sizes of plunging cutters are now available.

Q: How deep can the Jig cut?
A: 90mm with the Standard shaft (100mm without depth stop)
170mm with the Long shaft (180mm without depth stop)
Longer shafts are also available.

Q: What is the bearing system?
A: These are sintered bronze bushes impregnated with oil

Q: How long do the bearings last?
A: Typically, they will last 2-300 lock installations

Q: Are replacement bushes available?
A: They are available, but require specialist equipment to replace. We suggest ordering a housing kit instead which comes pre-assembled and takes just a minute to change over.

Q: What thickness of door will the jig suit?
A: Standard morticers will suit doors up to 55mm thick. For doors 55mm+ use the DBB/HK/S
Offset Morticers will suit doors up to 95mm thick, but this jig is not self- centring!

Q: Will the jig work on aluminium?
A: Yes, there are 4 cutters for aluminium doors. See the leaflet for precise details.

Q: Do you have cutters for steel doors?
A: No, not at present, but we have plans to develop some.

Q: Do I have to keep re-setting the jig when I take it off the door?
A: If the locks and door thicknesses are the same, you can use the tube clip at the top to create a ‘datum’ for repeat work. Simply slide the clip down to the top clamp. This will enable the user to cut identical holes without any re-setting.

Q: Does the Jig come with a drilling machine?
A: No, you have to provide your own.

Q: Is there a recommended Drill specification?
A: 800 Watt, 13mm (1/2″) Chuck and 2-3000 rpm is an ideal drill, but not SDS. Impact/hammer must be set to ‘off’.

Q: Can the jig be used to install electric locks?
A: Yes,there are two (2) long drills and a long drill adapter to drill through the door for lock cables.

Q: How do I prevent the knots in doors forcing the long drill off-line?
A: Both Long Drills use special geometry so that it wants to stay on line. Our instructions explain how to keep the drill central.


Buy your Souber Tools Morticing Jig here

No tags have been added yet. Please help others find this product by adding some tags.